AKTAR 600LM WITH PIR SENSOR

Part Number: AKTAR-D600

Features

  • Output with wires at the centre, back side
  • Available with a cable

Couleurs

  • Cool white (5700 K)

Description


This ceiling light is made with an electronic circuit mounted in a transparent polycarbonat housing, extremely resistant to shocks and recovered by a polyurethan resin which insures its waterproof.
This light is equipped with a PIR sensor which detects all presence of someone. The Infra red sensor detects the heat variation and not the movements like cartons which could move in the vehicle.
Detection beam is at 360° with an angle of 60° versus the vertical axle. It means that there is detection of someone located at 4,5m from the light which is fixed on a roof at 2.5m from the ground.
After detection, the bar light stays switched on 5 mn.
With its thickness of 9.9mm, this product is the most thinner of the market.
Leds are driven perfectly between 9 and 30V.
This product is protected against voltage peaks of 50V.
Its low consumption (4W) doesn’t create any overheating which allows a long led lifetime.
All used electronic components, leds included, come from known brands which warranty quality and reliability.

Technical Data


Tension 12/24V
Puissance (W) 4,2
Flux (lm) 600
Weight 0,068
Etanchéité IP69K
Nb Leds 12
Dimensions (mm) 125 x 65 x 18 (L x l x h)